Properties
Name | Type | Description |
|---|---|---|
Application | Returns the Engine object. | |
Sets image type (black-and-white, gray, color). The default value of this property depends on the scanner. | ||
Specifies the type of compression to be used for the scanned images. Please note that the possible type of compression depends on the image’s colority. The default value of this property depends on the scanner. | ||
Specifies the brightness of the scanned image (0-100). It is only valid when the BrightnessControl property is set to SBC_Manual. The default value of this property depends on the scanner. | ||
Sets brightness control mode. The default value of this property depends on the scanner. | ||
Specifies image resolution. This property can be any number in the range from 100 to 1200, but for best recognition results we recommend that you set image resolution to a number divisible by 100 in the range from 200 to 600. The default value of this property depends on the scanner. | ||
Sets image rotation angle (once the image has been scanned). The default value of this property depends on the scanner. | ||
Sets paper size. The default value of this property depends on the scanner. | ||
PaperBottom | Sets the coordinate of the bottom border of the scanning area rectangle (in milli-inch). It is only valid if PaperSize = SPS_Custom. By default, this property is set to 0. | |
PaperLeft | Sets the coordinate of the left border of the scanning area rectangle (in milli-inch). It is only valid if PaperSize = SPS_Custom. By default, this property is set to 0. | |
PaperRight | Sets the coordinate of the right border of the scanning area rectangle (in milli-inch). It is only valid if PaperSize = SPS_Custom. By default, this property is set to 0. | |
PaperTop | Sets the coordinate of the top border of the scanning area rectangle (in milli-inch). It is only valid if PaperSize = SPS_Custom. By default, this property is set to 0. | |
Specifies whether multi-page scanning is enabled. By default, this property is set to FALSE. If scanning options are set in FineReader Engine dialog box to use the automatic feeder, the value of this property is ignored and multi-page scanning is enabled. This is because automatic feeder is supposed to be used for multi-page scanning. | ||
Sets the required delay between scanned pages (no pause, delay for specified number of seconds, prompt for next page). By default, this property is equal to SPM_None. | ||
Delay | Sets the pause between pages in sec. It is only valid if PauseBetweenPagesMode = SPM_PresetDelay. Some scanners with automatic document feeder may ignore the value of this property. By default, this property is 0. | |
Specifies whether an automatic document feeder must be used. The default value of this property depends on the scanner: if the scanner has a flatbed, it is equal to SPFM_Flatbed. If not, it is SPFM_AutoFeeder. | ||
DuplexMode | Specifies whether duplex scanning must be used. If DuplexMode is set to TRUE you must also set MultipleImagesEnabled to TRUE. By default, this property is set to FALSE. | |
Setting this property to TRUE enables automatic skew correction, if this feature is supported by the scan source (see ScanSourceCapabilities::CorrectSkewSupported). By default, this property is set to FALSE. | ||
Setting this property to TRUE enables automatic removal of blank pages, if this feature is supported by the scan source (see ScanSourceCapabilities::DiscardBlankPagesSupported). By default, this property is set to FALSE. | ||
Related objects
Object Diagram